Equipment for regulating microclimate parameters is less and less associated with large installations that are connected to utilities. Leading climate system development companies offer compact and at the same time efficient devices with convenient control tools. Such devices include the Boneco 7135 air humidifier, intended for domestic use. Despite its modest size and low energy consumption, the device effectively performs its function, focusing on the settings specified by the user.

How the humidifier works

The operation of the model is based on the principle of ultrasonic influence. The body of the device contains a membrane, the vibrations of which break the water into small drops. Further through the working chamber, a special Boneco 7135 fan circulates air, due to the flow of which a foggy cloud is formed. In this way, humidity levels are achieved that can exceed the natural level. In any case, the user can adjust the settings of the device, using it to maintain it. As the tank empties, the corresponding indicator will indicate the need for another refill.

An important feature of this humidifier model is the water disinfection technology. Often, to fill the container, users take ordinary tap water, which does not differ in the quality of its composition. Thanks to special filters, the Boneco 7135 humidifier also provides comprehensive purification of the aquatic environment from germs and bacteria.

Main characteristics of the device

In the line, this model occupies an average position in terms of technical indicators. The power of the device is 130 W, which is quite enough to serve residential premises with an area of ​​​​about 50-60 m 2. In regular operation, Boneco 7135 consumes 550 ml of water per hour. At the same time, the volume of the standard tank slightly exceeds this figure - 650 ml.

Despite its modest performance, the device quickly gains optimal operating power and quickly brings the parameters to the required values. The dimensions of the device are also quite modest - 35 x 38 x 22 cm. But it is not only the combination of compactness and functionality that the Boneco 7135 device attracts the attention of buyers. Reviews also emphasize the modern control system. The owner can set the operating parameters of the device to automatic control mode, saving himself from unnecessary hassle.

Instructions for use of the device

You can start working only after preparing the device for use. The device should be installed in a place away from heating equipment. However, it is not recommended to point the device’s spout at specific objects in order to intensively moisten them. Immediately before turning on, you should fill the tank with water, the temperature of which does not exceed 40 degrees. The functions are controlled through a panel with buttons, which is equipped with the Boneco 7135 humidifier. The instructions note that in normal misting modes, the device operates only until the user-specified humidity coefficient is reached. To maintain a constant generation mode, you should set the automatic operating format using the appropriate button. In addition, the operator has the option of heating the fog within a range, which is also set through user settings.

Care and maintenance instructions

The device, due to its electronic filling, independently determines the need for cleaning. So, if the letter “A” lights up on the display, this means that the device needs to be rinsed. Both the water tank and the Boneco 7135 tank should be cleaned. The instructions warn against using cleaning agents - the components of the device should be washed only with clean water. If during operation the fogging mode was used predominantly, then cleaning is recommended to be performed once a week. If the medium was also heated, then washing is done more often - twice a week. Filter cartridges should also be replaced regularly. In the average mode of operation of the humidifier, they are updated every month.

Features of the Boneco 7135 model

Despite the simplicity of its functionality, the device received many interesting technological additions. For example, a digital display with programmable control elements ensures high accuracy when setting the humidity level. At the same time, the tank indicator allows you to monitor the current volume of water and, if necessary, fill the tank. The Boneco 7135 model also includes many design additions. Thanks to the rotary evaporator, the user can adjust the direction of the steam. But, again, the instructions do not recommend placing the device close to other objects, especially plants. The features of the device include a system for handling liquid media. The fact is that water from the tank does not pass into the processing zone immediately, but after filtration. Including an additional purification stage creates a healthier air environment. True, the popular system of ionization through filters is still missing in this modification.

Positive reviews about the model

Climate control equipment is traditionally criticized by users for high energy consumption and noisy operation. However, in this case the device is free from such shortcomings. Quiet operation, for example, was made possible thanks to the use of a special design with rubberized legs. As for the low energy consumption, it is due to the compact size and optimized operating principle of the device. But there are other advantages that the Boneco 7135 humidifier has. Reviews, in particular, indicate the absence of a specific white residue on furniture that remains after the work of other representatives of the segment. Such deposits are typical for humidifiers that work with water without prior preparation. In turn, the design from Boneco provides for a separate stage of water purification, which removes foreign impurities from the generated steam.

Negative reviews

Despite all the advantages of the design, there are also unfortunate miscalculations in its execution. Users note inconvenience during the process of filling water. To perform this operation, you need to remove the housing from the pan, turn it over, then unscrew the filter and fill the tank. The procedure is complicated by the fact that the component parts do not fit together perfectly and you have to adapt to the specific installation of the Boneco 7135. Reviews are also critical of the heating function. Some users note that it is not needed at all, while others testify that in reality it does not justify itself.

Conclusion

In the climate systems market, there is a division of products into two classes. One is characterized by multifunctionality, while the other involves a clear segmentation of devices by purpose. Household 7135 rather belongs to the second category, since it is focused on performing a specific task in regulating the microclimate. And this device copes with the function of increasing humidity adequately, although the very concept of specialized devices gives every reason for complete and effective work. This is due precisely to the fact that the device gets rid of the burden in the form of unnecessary functionality. However, in the case of modification 7135, it was not without auxiliary options in the form of heating and water purification. And if the function of increasing the air temperature was generally greeted by the consumer without enthusiasm, then filtration provided quite tangible benefits.

Congratulations on your purchase of the BONECO 7135 ultrasonic humidifier (hereinafter referred to as humidifier)

User manual

Do you know that insufficient humidity air...
leads to drying of the mucous membranes, which in turn causes cracking of the lips and burning in the eyes;
favors the development of infection and respiratory diseases;
causes fatigue, leads to increased eye fatigue and poor concentration;
negatively affects the condition of domestic animals and indoor plants;
leads to increased dust formation and an increase in the electrostatic charge of synthetic fabrics, as well as carpets and synthetic floor coverings;
leads to damage to wood furniture and especially parquet floors;
negatively affects the tuning of musical instruments.

General information

The humidifier is designed to automatically maintain a given level of relative humidity in the room. Comfortable conditions are achieved at a relative air humidity of 40 to 60%. If the actual humidity drops below the level you set, the humidifier automatically turns on and operates until the set relative humidity value is reached, after which the humidifier automatically turns off.

Rules for safe operation

Before putting the humidifier into operation, carefully read these operating instructions and save them for future use.

The humidifier is designed to operate only from the mains alternating current. The AC voltage must match the data on the humidifier nameplate.

The humidifier should only be used in residential areas in compliance with the specified operating conditions. Using a humidifier for other purposes may create situations that are dangerous to the life and health of people.

Attention! Children do not understand the dangers associated with using electrical appliances, so do not leave children unattended near the humidifier (Fig. 1)!

Do not allow children or persons who have not read these instructions or are under the influence of drugs or alcohol to use the humidifier, at least without supervision.

Do not operate the humidifier if the power cord or plug is damaged (Fig. 2), or if the humidifier is faulty, damaged by a fall (Fig. 3), or under other circumstances. The humidifier must only be used when fully assembled.

Repairs to the humidifier should only be carried out by qualified personnel (Fig. 4). To avoid personal injury or property damage, do not attempt to repair the humidifier yourself.

Be sure to unplug the humidifier from the power outlet in the following cases:
— before emptying or filling the tank with water;
— before cleaning and maintenance; before installing/dismantling humidifier elements;
— before moving the humidifier to another place.

To avoid getting burned while the humidifier is running, do not touch the humidifier membrane. Due to the high vibration frequency, the membrane becomes very hot.

When disconnecting the humidifier from the power supply, do not pull the power cord or touch it with wet hands.

Place the humidifier on a flat, dry surface (Fig. 5).

Read also Operating instructions for BONECO U350

Do not install the humidifier on the floor or in close proximity to heating appliances, walls, furniture or other objects.

The steam escaping from the humidifier can damage the surfaces it touches.

The manufacturer and seller are not responsible for damage caused by improper positioning of the humidifier.

The humidifier should be installed on some elevation (Fig. 7), for example, on a table, chest of drawers, etc.

Do not pour water into the humidifier through the spray head.

Do not immerse the humidifier in water or other liquids.

Do not install the humidifier in a walkway or other location where it could be bumped, knocked over, etc. When the humidifier is not in use, unplug it from the power supply.

Do not route the power cord under carpet or other objects. Position the humidifier so that the power cord is not accidentally touched.

Do not use the humidifier in areas where explosive materials are stored or where flammable gases may accumulate.

Do not leave the humidifier out in the rain. Do not use the humidifier in damp areas.

Do not allow foreign objects to enter the humidifier.

Do not block the air intake device and the spray head of the humidifier with foreign objects.

Do not sit down, stand up or stand heavy objects to the humidifier.

To avoid damaging the humidifier, do not add water to the humidifier used. essential oils, preservatives, flavorings and other foreign impurities! The manufacturer and seller are not responsible for damage to the humidifier resulting from failure to comply with this requirement.

The high-frequency vibrations of the ultrasonic humidifier membrane are inaudible and completely safe for people and pets.

Unpacking the Humidifier

Carefully remove the humidifier from the box.

Remove the plastic wrap from the humidifier.

Make sure that the power supply matches the specifications indicated on the nameplate of the humidifier.

If possible, do not throw away the original packaging and store the humidifier in it when not in use.

Commissioning

When choosing a location to install your humidifier, follow the guidelines below:

Do not install the humidifier in close proximity to heating appliances, or on a heated floor (heated).

Do not direct the steam jet at plants, furniture or other objects. The distance from the humidifier to these objects should be at least 50 cm.

When operating the A250 AQUA PRO, follow the instructions given in the supplied operating manual.

Fill the tank with water following the instructions in the “Filling the tank with water” section (Fig. 12).

Install the water reservoir into the base of the humidifier housing. Install top part housing onto the base and insert the spray head (Fig. 13).

Make sure that the power cable is not damaged (Fig. 2 and 9). Do not turn on the humidifier if the power cable is damaged.

Insert the plug into the power outlet and turn on the humidifier using the switch.

The humidifier will return to operating mode 10-15 minutes after switching on.

Humidifier device

Filling the tank with water

Before starting work on filling the tank with water, turn off the power supply to the humidifier and remove the power plug from the power socket (Fig. 35). When the humidifier is turned on, do not touch the humidifier membrane with your hands.
Do not turn on the humidifier if there is no water in the tank! If the actual water level in the tank falls below the minimum acceptable level, the humidifier automatically turns off and the red indicator on the control panel lights up.
Make sure there are no foreign objects in the tank.
Unscrew the reservoir cap. Fill the reservoir with clean, cold tap water (Fig. 13). Screw the cap tightly into the reservoir opening. Install the reservoir into the base of the humidifier housing. Place the upper housing onto the base and insert the spray head (Fig. 14). Do not add flavorings, preservatives or other foreign impurities to the water!
Insert the power plug into a power outlet and turn on the humidifier. The green indicator on the Humidifier control panel will light up.

Use of aromatics

The use of essential oils, preservatives, flavors and other additives, even in small quantities, is not allowed! The material from which the water tank is made is not designed to contain additives, so one drop of such a substance is enough to damage the tank and cause the humidifier to break down. If damage to the humidifier is caused by failure to comply with this requirement, the warranty will automatically become void.

Device for ensuring high quality of evaporated water (optional accessory)

To ensure the required quality of evaporated water, the humidifier uses an Ionic Silver Stick® (ISS). The action of this new and unique product (Fig. 16) is based on the proven antiseptic properties of silver, the ions of which effectively purify water from harmful bacteria and microbes. The ISS ion rod saturates water with silver ions for one year or more. The device is self-healing and does not require Maintenance. The location of the ISS rod inside the humidifier is shown in Fig. 16. Do not touch the ISS rod while the humidifier is operating. Before starting any work on the wand, turn off the power supply to the humidifier and remove the plug from the power outlet. If the ionic silver rod is not included with the humidifier, you can purchase it as an additional accessory.

Control 7135

A) On/Off
Pressing button A turns the humidifier on or off.
B) Hygrostat (Air humidity control)
By pressing button B, the required air humidity in % is adjusted. The recommended value for relative air humidity is from 40 to 60%. The humidifier adjustment range is 40 – 75%. The measurement accuracy is +/- 5%. If the air humidity exceeds the desired setting, the humidifier turns off. The humidifier does not turn off if the display is set to “Co” (Continuous operation). When selected, the specified value is indicated. After a few seconds the display automatically switches to the actual value.
C) Timer
Using button C you can set the operating duration - values ​​can be from 1 to 9 hours or Continuous operation. When the required time is selected, “TIME” lights up on the display. When the timer is activated, the indication goes out.
D) Steam production (Evaporation power adjustment)
By repeatedly pressing button D you can adjust the steam output. When red stripes appear on the control panel, the highest evaporation power has been reached.
E) Working with water heating
Button E is used to turn water heating on or off. When the heating is turned on, the water is heated to 80 °C before entering the steam generation chamber. After this, the generated steam has a temperature of 40°C. The advantage of this is that the room temperature does not drop and the purity of the water is significantly improved (bacteria are killed).
F) Automatic mode and sleep mode
By pressing the F button, you can activate the automatic (ITC) or ZZZ sleep mode. When the automatic (ITC) mode is activated ("AUTO" is displayed on the control panel), it is supported optimal humidity air depending on temperature. The adjustment is based on the amount of steam produced and the set value. When the “ZZZ” mode is set, the air humidity value is set to 60%; the time is automatically set to 8 hours; heating is on. Additionally, the amount of steam is adjusted depending on the difference between the set and actual values.
1) Lack of water indicator The amount of water is clearly visible through the transparent water tank. The moment when it is necessary to add water is additionally indicated on the control panel (Symbol 1). For more information, see the chapter “Filling the water tank”.
2) Cleaning indicator If symbol 2 with the word “CLEAN” appears on the display, you must clean the humidifier according to these instructions. This symbol lights up automatically, based on usage, every two weeks. The indicator can be forcibly reset by long pressing (about 10-15 seconds) button A on the operating device.

The use of electric air humidifiers benefits adults and children with diseases of the skin, respiratory system, allergic conditions, and makes it easier to care for house plants, wooden furniture and fancy interior items. The Boneco U7135 air humidifier is ideal for use both at home and in any other room due to its small dimensions, convenient design and extremely clear control panel.

Humidifier Boneco U7135

Air humidifier Boneco (Boneko) 7135 is intended for use in rooms up to 60 square meters. The device is very useful both in hot summer and in winter time when the air in the room is dried out by the heating system. With its help, you can avoid the spread of infection in the respiratory tract, drying out of home flowers, damage to furniture, parquet and interior items made of wood.

The peculiarity of the U7135 model is that its operating principle is based on ultrasound, that is, inside this device there is a membrane that vibrates under the influence of ultrasonic vibrations and breaks the water into a cloud of fine water vapor.

Due to ultrasound, the humidifier operates almost silently and does not change the room temperature. The operating mode of the device includes the function of heating the steam produced, but most often consumers prefer cold humidification.

The volume of the humidifier's water tank is 6.5 liters; thanks to its removable design, liquid can be added to it quite easily. To prevent the proliferation of pathogenic microorganisms, the inside of the tank is coated with an antibacterial composition, which ensures the safety of long-term operation. The presence of a built-in hygrometer allows you to fully automate indoor air humidification: the hygrometer itself controls the programmed humidity level, adjusting the intensity of the steam supply.

The water tank is equipped with a replaceable filter, or cartridge, for additional disinfection of the liquid. The filler for the filter is an ion exchange resin; if desired, it can be equipped with an ionizing silver rod, which has bactericidal activity against more than fifty viruses and microbes.

The cartridge also softens water and prevents the spread of tap water salts throughout the room, which confirms the absence of a whitish coating on furniture and interior items after prolonged use. The cartridge should be changed every 2–3 months, and even earlier if you use very hard water. To warn of the need for timely replacement, a contamination sensor is provided.

Using the device

Thanks to its convenient design and clear liquid crystal control panel, even an elderly person can operate the device. Instructions for use (manual) are included with each device, and you must read it before using the device.

Device diagram

Before use, the device must be placed on a flat surface away from heating sources (including heated floors). Fill the water tank with clean cold water temperature not exceeding 40 °C. Do not add any impurities - essential oils, herbal infusions, flavors, substances for additional softening and purification of water. Having placed the container on the stand, turn on the device and activate it using the switch button on the LCD screen. Next, set the desired parameters:

1. 1. The level of humidity in the room, after reaching which the device will automatically turn off. Customizable ranges 40–75%.
2. 2. Running time: ranges from 1 hour to 9 hours, or continuous mode can be selected.
3. 3. Regulation of evaporation rate.
4. 4. Turning on/off heating, which ensures heating of water to 80 °C, at which the steam temperature will be 40 °C.
5. 5. Automatic operating mode: provides the optimal combination of humidity level and room temperature.

The humidifier tank is cleaned once a week. running water without additional chemicals. Limescale deposits in the spray area are removed using products intended for this purpose, followed by thorough rinsing. The remaining spare parts are wiped with a soft cloth; the use of solvents and glass cleaning agents is unacceptable.

If suddenly the humidifier has low supply power or no steam at all, then most likely the problem is a clogged membrane or air filter located on the device stand (indicated by numbers 8 and 12 in the diagram). They must be carefully cleaned: treat the membrane with a brush, and rinse the filter thoroughly.