Breezer Tion 3S is a compact supply ventilation with heating, air purification and smart control from a smartphone. The breather supplies fresh, clean air from the street, effectively ventilating even with the windows closed. The recirculation mode allows you to clean the air inside the room from dust and odors. The automatic control function will save time and energy.
The most effective in terms of cleaning degree
Filters G4 + HEPA H11 + AK-XL
+ air heating
Price: 38,990 rub.
The most convenient breather: base station included
Filters G4 + HEPA H11 + AK-XL
+ air heating
Price: 47,990 rub.
Breather installation
THESE GUYS WILL COME AND INSTALL A BREEZER IN YOUR HOME IN 1 HOUR.
Installation is easier than an air conditioner. There is no seasonality. The facade does not spoil. During renovation or with final finishing. There is no dust or dirt. They will clean up after themselves. .
Filters for Tion 3S
![](https://i1.wp.com/freshairshop.ru/content/filter_komplekt_3s.jpg)
- Primary filter class G4 - 490 rub.
Installed in all breathers. Retains fluff, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without using household chemicals. Replacement frequency - once a year, depending on operating conditions. - HEPA filter E11 (H11) - RUB 1,990
Purifies the air according to medical standards from the smallest contaminants, including allergens: dust, pollen, infections, mold spores, etc. Replacement frequency - once every 2 years, depending on operating conditions. - Adsorption-catalytic filter AK-XL - RUB 1,990
Cleans the supply air from harmful gases and industrial emissions. Replacement frequency - once a year, depending on operating conditions.
Cost of a complete set of filters - RUB 4,070
Quality assurance
We are confident in quality. The service life of the device is at least 5 years. With careful handling, timely replacement of filters and compliance with the operating instructions, the device will last you much longer. The warranty for Tion 3S is 1 year from the date of purchase.
What does every resident of a metropolis need? In clean and fresh air! What can provide a person with clean and fresh air? Of course, the ventilation unit Breezer Tion 3S Smart. The device is distinguished by its performance and compact size. The advantage of the model is that it comes with a MagicAir base station.
Features and Benefits:
- The breather continuously supplies fresh air from the street with the windows closed.
- A cascade of 3 filters deeply purifies the air according to medical standards.
- The supply air is heated and protects from drafts in winter.
- The windows are closed and noise from the streets and highways does not enter the room.
Modification Smart. MagicAir smart microclimate system base station included. Adsorption-catalytic filter AK-XL. Contains:
- A heating element. You set a comfortable temperature on the breather, and it heats the supply air to the specified value. Protects against drafts.
- Control panel with LCD display. Informative display for easy operation.
- Prefilter Installed in all breathers. Protects the device from the ingress of large debris when air from the room passes through the breather in recirculation and mixed modes.
- Primary filter class G4. Installed in all breathers. Retains fluff, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without using household chemicals. Replacement frequency - once a year, depending on operating conditions.
- MagicAir base station. Monitors air quality and controls climate control equipment.
The breather is not intended for heating a room.
Cleaning filter set:
- Highly efficient filter class E11 (H11). Purifies the air according to medical standards from the smallest contaminants, including allergens: dust, pollen, infections, mold spores, etc. Replacement frequency - once every 2 years, depending on operating conditions.
- Primary filter G4. Retains fluff, wool, large particles of dust, pollen and other pollutants. It is recommended to vacuum or rinse with water once a month without using household chemicals. Replacement frequency - once a year, depending on operating conditions.
- Adsorption-catalytic filter AK-XL. Purifies the air from harmful gases and industrial emissions. Replacement frequency - once a year, depending on operating conditions.
Compact air handling units from the Breezer company are an excellent choice for the office. The units do not simply supply air from the street: before supply, the air is purified and heated, which ensures comfortable microclimatic conditions. Stuffiness, dampness, unpleasant odors - all this will become just a memory after installing the Breezer air handling unit! The family is represented by a variety of models: for megacities, for warm regions, for connoisseurs of comfort, etc.
The main difference between this unit and other competitors in its class is that Tion initially includes absolutely all the elements and functions of a full-fledged ventilation unit.
The second difference is the filter elements. The ventilator uses filters with the maximum possible surface area for this device; in other words, during operation, expensive filters will have to be changed much less frequently than in other air handling units. The only exception is, perhaps, the filters in which are as effective and have the same long service life as in Tion installations.
The third difference is that not every ventilator is equipped with a wireless control panel, which greatly simplifies the control of the air handling unit.
Configurations and price Breezer Tion 3S
Breezer Tion 3S Smart |
Breezer Tion 3S Standard |
![]() |
![]() |
Price: 47,990 rub. | Price: 38,990 rub. |
Air heating Primary filter G4 Fine dust filter HEPA E11 (H11) up to 140 m3/h MagicAir smart microclimate system base station included |
Air heating Fine dust filter HEPA E11 (H11) Filter against harmful gases AK-XL Remote control with LCD display Performance up to 140 m3/h |
Breezer Tion 3S Special |
Breezer Tion 3S Plus |
![]() |
|
Price: RUB 37,990 |
Price: 46,990 rub. |
Air heating Primary filter G4 Fine dust filter HEPA E11 (H11) Remote control with LCD display Performance up to 160 m3/h Can be connected to the base station of the MagicAir smart microclimate system |
Air heating Primary filter G4 CO2 sensor Fine dust filter HEPA E11 (H11) Filter against harmful gases AK-XL Remote control with LCD display Performance up to 140 m3/h Can be connected to the base station of the MagicAir smart microclimate system |
Configurations and price Breezer Tion O 2
Breezer Tion O 2 Lite |
Breezer Tion O 2 Base |
![]() |
![]() |
Price: 19,900 rub. | Price: 23,990 rub. |
No air heating Coarse dust filter F7 Remote controller remote control*Performance up to 130 m3/h |
There is air heating Filter from large dust F7 Remote Control Performance up to 120 m3/h |
Breezer Tion O 2 Lite |
Breezer Tion O 2 Base |
![]() |
![]() |
Price: RUB 25,990 |
Price: 26,990 rub. |
There is air heating Filter from large dust F7 Filter from harmful gases AK Remote Control Performance up to 120 m3/h |
There is air heating Coarse dust filter F7 Fine dust filter HEPA E11 (H11) Filter from harmful gases AK Remote control Performance up to 120 m3/h Can be connected to the base station of smart microclimate systems MagicAir |
Ventilators Tion 3S and Tion O 2 have 3 stages of air purification
![](https://i1.wp.com/kk-k.ru/images/project/%D0%92%D0%B5%D0%BD%D1%82%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F/%D0%A2%D0%B8%D0%BE%D0%BD/%D0%A4%D0%B8%D0%BB%D1%8C%D1%82%D1%80%20G4.jpg)
1. Pre-dust filter. This filter purifies the air from mechanical pollutants contained in the air larger than 10 microns in size. The filter corresponds to purification class G4 and purifies the air from plant pollen, poplar fluff and other large pollutants. The filter is reusable and can be washed in warm water. The recommended filter cleaning interval is once every 3 months.
Price: 690 rub.
![](https://i0.wp.com/kk-k.ru/images/project/%D0%92%D0%B5%D0%BD%D1%82%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F/%D0%A2%D0%B8%D0%BE%D0%BD/%D1%84%D0%B8%D0%BB%D1%8C%D1%82%D1%80%20%D0%BA%D0%BB%D0%B0%D1%81%D1%81%D0%B0%20E11.jpg)
2. HEPA fine filter. This filter corresponds to purification class 11 (H11) and cleans the air from fine dust, soot and all other pollutants larger than 0.3 microns. The filter is disposable and cannot be restored.
Price: 1990 rub.3. Filter AK-XL.The final stage of air purification is an adsorption filter.Here, air purification occurs at the molecular level. The filter content is Activated carbon, which allows you to clean the air from foreign odors and other pollutants at the molecular level. The filter is disposable.
Price: 2190 rub.Filter AK-XXL. Not included in delivery. Can be used instead of a HEPA filter. It is characterized by greater dirt holding capacity and is intended for people living in close proximity to highways, plants, factories, and smoking neighbors. The filter is disposable and cannot be restored.
Price: 3490 rub.Operating principle of the air supply unit Tion 3S
When the unit is turned on, the air damper opens ( 8
) and through the hole located at the bottom of the installation body, air from the street is sucked into the device.
Next, the dirty air enters the pre-dust filter ( 7
), where it is cleaned of large dust and then goes to a HEPA filter ( 6
) and then goes to the final cleaning filter ( 5
), where it is cleaned of odors and molecular contaminants. After the air is completely cleared of contaminants, it passes through a heater ( 4
). The air then hits the fan ( 2
) and completely cleaned and heated to a given temperature, is supplied to the room. The prefilter (9) traps large particles and is used in two operating modes of the ventilator: recirculation mode and mixed mode.
The installation can operate in 3 modes.
1. Recirculation mode when the ventilator takes air not from the street, but from the room in which it is located. In this mode Supply unit becomes a professional air purifier.
2. Mode supply ventilation
when the device completely takes in air from the street.
3. Mixed mode when the ventilator takes air in equal proportions from both the street and the room.
Using a control panel with a liquid crystal display, you can set the required settings and fully control the ventilator from a distance.
Control of air handling unit Tion 3S
Air handling units in any configuration are equipped with WiFi and Bluetooth modules. The ventilator can be controlled using the remote control included with each unit, or using your smartphone via Bluetooth using an application for:
Android on Google Play and iOS on the App Store
Thanks to the remote control, you can turn the unit on and off, set the required temperature for heating fresh air in winter and completely turn off heating in summer. You can also regulate the intensity of air supply to the room and set a timer to automatically turn the ventilator on and off at a given time. The display of the control panel displays all installed information, including the number of days remaining until the filters are replaced. Read more in:
You can control Tion 3S using the MagicAir station.
MagicAir base station with CO 2+ module
The MagicAir base station together with the CO 2 + carbon dioxide control module constitutes a smart microclimate system. The base station allows you to connect up to 40 different devices. At the moment, these devices are Tion air supply units, but developments are actively underway in this area and it is planned to soon connect not only ventilators, but also air conditioners, humidifiers, etc. That is, this station will perform the functions of a smart home.
Today, by installing one station in any place convenient for you and several ventilators with CO 2 + sensors in each room, it becomes possible to control the air quality in each room. Having set the required CO 2 + concentration values for each room, the base station will automatically turn on and off the air supply units, thereby ensuring ideal conditions ventilation in every room and significantly saving your money.
Communication between the station, air handling units and CO 2 + sensors is carried out via WiFi and does not require laying any wires, which allows you to organize this automatic ventilation system even in already renovated rooms. The MagicAir system is suitable for both Tion 3S and Tion O 2. Read more about the MagicAir base station here:
The difference between the air supply unit Tion O 2 and Tion 3S
Tion O2 | Tion 3S |
![]() |
![]() |
Bottom air distribution, horizontal | Air distribution top, vertical |
Mode of only full air flow from the street |
Air recirculation mode, full supply from the street, mixed mode |
The electrical cable cannot be hidden in the wall |
Hidden installation of electrical cable possible |
Minimum noise level 32 dB | Minimum noise level 19 dB |
Maximum air flow 130 m 3 /h | Maximum air flow 160 m 3 /h |
Fan rotation speed - 4 speeds | Fan rotation speed - 6 speeds |
Warranty period - 1 year | Warranty period - 2 years |
Remote Control | Remote Control |
![]() |
Installation of the air handling unit
The leader in sales among air handling units is the breather. Tion 3S is a 2 in 1 multi-system: an air supply unit and an air purifier with the ability to simultaneously operate in both capacities. For the convenience of customers, the manufacturer produces the device in three configurations: Tion 3S Special, Standard and Smart.
For customers who are wondering which breather to choose, we have prepared a comparative analysis:
1. Performance. Tion 3S is more powerful (140-160 m3/h depending on the configuration) and is designed to provide air for up to 5 people in a room of up to 40 sq.m. The productivity of Tion O2 reaches 120 m3/h, this volume of air is enough for 4 people.
2. The noise level in Tion 3S is significantly lower than in Tion O2 due to the use of noise-absorbing material along the entire body - from 19 dB at speed 1 to 47 dB at the highest. In Tion O2 the noise level is 32-52 dB.
3. Recycling. Tion 3S has an additional recirculation mode, thanks to which the breather purifies not only the air coming from the street, but also the air circulating indoors (which is always important, since the materials used in construction, furniture and furnishings produce dust and toxic substances) . A mixed operating mode is also provided, in which air is taken from both the street and the room in equal proportions, which reduces heating costs in the cold season. There are no such modes in Tion O2.
4. Filtration level in both modifications of the breather it is almost the same. The class of the base filter in Tion 3S is lower (G4, not F7), but it is equipped with a pre-filter for large dust. The preset set of filters varies depending on the device configuration. All versions of the 3S breather are equipped with a basic dust filter and a medical-grade HEPA filter; The adsorption-catalytic filter is pre-installed in the Smart and Standard trim levels. From the Tion O2 line, the Standard package includes all three filters, while the Base and Lite package includes only the basic one. Any breather can be equipped with a high-capacity filter AK-XXL, which protects against unpleasant odors, smoke, exhausts, industrial emissions, etc.
5. Management. In Tion O2, control is carried out using buttons on the instrument panel or from the remote control. The Tion 3S body does not have a display or buttons, but its remote control is equipped with a mini-display and a Bluetooth module, and it is additionally equipped with a control button with LED indication. When purchasing a MagicAir climate control system, control can be carried out through a free smartphone application.
6. Number of speeds Fan operation: 6 stages in Tion 3S, 4 stages in Tion O2.
7. Air flow direction in Tion O2 - frontal, 30 degrees upward. In Tion 3C, the air comes out upward, through two grilles on the upper wall of the breather. It is possible to install it upside down.
8. Hidden wiring. Tion 3C comes standard with the possibility of both a standard connection via a cable to a socket, and a hidden connection, in which the power lines to the device are supplied inside the walls and special building structures. Tion O2 only provides connection via electrical cable, connection hidden wiring possible, but not by standard means.
9. Climate control - the function of automatically turning on heating when the supply air temperature drops to a user-specified value - is provided in both Tion O2 (heating up to 25C) and Tion 3S (up to 30C). Both breathers have the ability to turn off the heater.