The KK-32 gantry crane is a safe and reliable equipment designed for operation under conditions of increased loads in regions with harsh climates. High specifications gantry crane KK-32 and its environmental friendliness correspond not only to domestic, but also international standards quality, which is an undeniable advantage of this model of special equipment over similar installations.
Technical specifications
Technical characteristics of KK-32 are presented in the table.
Parameter | Index |
span | 32 m |
Load capacity | 32 t |
Operating mode | Group AZ/ZK |
Load lifting height | 10 m |
Speed: Boom/Trolley/Crane | 0.125/0.5/1 m/min. |
Trolley Tread Width | 2.5 m |
Console length | 2 m | 220 kN |
Crane weight | 95 t |
Type of current | Variable |
Rail type | R 50 (according to GOST 7174-75) |
Temperature | From – 40 o C to +40 o C |
A distinctive characteristic of the KK-32 gantry crane is the presence of anti-theft grips, which ensure the safe operation of special equipment in regions with high wind loads. If the pressure force of wind flows does not exceed 25×105Pa, then the installation is held in its original position by the braking system, which is located in the movement mechanism.
If the parameters of wind loads exceed the norm, the position of the special equipment is regulated using anti-theft grips, which are activated after transmitting a signal from a sensor that responds to pressure and wind speed. The presence of special anti-theft equipment helps prevent emergencies on a construction site.
Use of special equipment
The KK-32 crane installation is designed for high-rise installation and construction work. The design features of the crane installation allow us to complete the assigned tasks with maximum precision and accuracy.
The crane's lifting mechanism is equipped with a “reduced descent speed” function, the adjustment range of which is ¼. In addition, gantry cranes are widely used when performing unloading and loading operations in warehouses, docks and hangars.
The demand for special equipment is also due to the efficiency of the KK-32: the crane consumes a small amount of electrical energy.
The Bashregionkran company specializes in the production and repair of crane equipment. Our company has been working in this field for more than 10 years, and is ready to offer its customers the production of overhead, gantry and jib cranes.
Having our own production site located in the industrial zone of the city of Ufa, we sell products and also provide additional services. We carry out qualified repairs of cranes and provide professional technical support, which includes diagnostics and preventive inspection.
If necessary, our specialists are ready to transport large-sized crane equipment across Russia and perform installation, dismantling or maintenance work.
Production
We specialize in manufacturing:
- Single- and double-span overhead bridge cranes.
- Bridge support single girder cranes.
- Bridge double girder cranes.
- Gantry cranes.
- Console cranes.
- Traverses.
We offer a wide range of services in the field of maintenance of crane equipment:
- Installation and dismantling of crane equipment.
- Repair of cranes, as well as their examination and technical diagnostics using modern technology.
- Installation and repair of crane tracks.
- Installation and maintenance of various security devices.
Crane repair
For organizations that own lifting mechanisms, we offer technical support (preventive inspection, diagnostics) and qualified repairs of both equipment as a whole and its individual components and assemblies, including:
- repair of overhead cranes;
- repair of gantry cranes;
- repair of crane beams;
- repair of metal structures of the gas and hydraulic plant;
- repair of gearboxes, trolleys, winches;
- replacement of cable and rope products;
- replacement and repair of electric motors;
- production of overhead, gantry, and console cranes;
- metalwork and turning works;
- repair of hoists with lifting capacity from 0.5 t to 16 t;
- installation, repair, leveling, construction and replacement of crane tracks for gantry and overhead cranes;
- dismantling, installation of cranes with commissioning.
- transfer of cranes from the cabin to the floor (with or without dismantling the cabin)
Geography of coverage
Today we offer services for the sale and production of gantry, bridge and jib cranes not only in Russia, but also in neighboring countries.
Our equipment is successfully sold in the following regions:
- Russia. Republic of Bashkortostan (city of Ufa, Sterlitamak, Neftekamsk, Salavat), Republic of Tatarstan (city of Kazan, Almetyevsk, Naberezhnye Chelny, Zainsk, Yelabuga), Orenburg region (city of Orenburg and Buzuluk), Sverdlovsk region (city of Yekaterinburg, Nizhny Tagil, Serov, Kamensk-Uralsky), in the Perm region (the city of Perm, Solikamsk, Berezniki), the Chelyabinsk region (the city of Magnitogorsk and Chelyabinsk), the Tyumen region (the city of Tyumen, Surgut, Nizhnevartovsk). In addition, our equipment is purchased by enterprises operating in Moscow, Izhevsk, Nizhny Novgorod, Irkutsk, Omsk, Tomsk, Kurgansk and Krasnoyarsk.
- Kazakhstan. Almaty, Astana, Shymkent, Karaganda, Aktoba, Uralsk, Kostanay, Petropavlovsk, Zhanaozen.
- Etc.
The Special Gantry crane KSK 32 complies not only with all Russian, but also with almost all international quality and safety standards. This means that the equipment is not only reliable, but also safe to use, and, moreover, very environmentally friendly. And, like any equipment designed to work in harsh Russian conditions, this gantry crane can withstand quite serious seasonal temperature changes, working equally well in both summer heat and winter cold.
Designed for outdoor installation and loading and unloading operations. The lifting mechanism has a reduced descent speed with a control range of 1:4, which allows installation work to be performed with high precision. The design of the crane allows it to be self-installed.
Gantry cranes KSK-32 are used during construction, as well as during loading and unloading in hangars, docks and warehouses. They have high operational advantages and favorable technical characteristics.
Gantry cranes KSK-32 use economically electrical energy, have a wider range of operating temperatures and ensure smooth operation.
Characteristic | Meaning |
---|---|
Crane operating mode group according to ISO 4301/1 | A4 |
Load capacity, t: | |
- on the left console in the span, on the right console up to the flight 12 m | 32 |
- on the right console from 12 to 16 m | 20 |
Type of crane rail according to GOST 7174 | P50 |
Lifting speed, m/s (m/min) | 0,109-0,133(6,5-8) |
Travel speed, m/s (m/min): | |
- crane | 0,61(37) |
- trolleys | 0,55(33) |
Total rated power of electric motors installed on the crane, kW, no more | 83 |
Type of current | variable |
frequency Hz | 50 |
Voltage, V | 380/220 |
Appearance and overall dimensions of the gantry crane KSK-32
No. | Span, Lk, m | Lifting height, m | Dimensions in mm | Weight, t, no more | ||||
---|---|---|---|---|---|---|---|---|
L1 | L2 | L3 | B | H1 | ||||
1 | 42 | 18/14 | 16000 | 18520 | 12000 | 12000 | 26910 | 94/91 |
2 | 3500 | 5710 | - | 12000 | 26910 | 88/84 | ||
3 | 32 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 89/86 |
4 | 3500 | 5710 | - | 10440 | 26910 | 83/79 | ||
5 | 26 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 86/83 |
6 | 3500 | 5710 | - | 10440 | 26910 | 80/76 | ||
7 | 36 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 91/88 |
8 | 3500 | 5710 | - | 10440 | 26910 | 85/81 |