VORTEX DN-550N is designed for pumping and draining water and wastewater with foreign impurities from various reservoirs and reservoirs (pits, mines, drainage pits, etc.). With their help, you can pump out water in case of flooding of residential premises and basements. The pump electric motor is asynchronous, single-phase with a squirrel-cage rotor. The maximum suction depth is no more than 8 meters. The temperature of the pumped liquid should be from +1°C to +35°C. Work not allowed drain pump“dry” (without water), air entering the suction line. The pump is protected from overload by a thermal protector and shuts down automatically. For temporary installations, flexible pipes are recommended; for permanent installations, rigid pipes are recommended.

The difference between the DN-550N model is that the body is made of stainless steel. In addition, when using this model, a high level of water contamination is allowed; the largest size of solid particles should not exceed 35 mm.

Technical characteristics of VORTEX DN-550N

Information about technical specifications, included in delivery and appearance, may differ from that indicated on the website. Please check this information with the manager when submitting your application.

Corded screwdriver VORTEX SSH-550/2- a functional power tool with adjustable torque, designed for tightening and unscrewing screws, screws, dowels and other types of fasteners, as well as for drilling holes in various materials in everyday life and industry. Operates on 220-230V power supply.

This screwdriver differs from the SSh-550/1 model in that there are two speeds, a higher rotation speed and maximum torque. There is a backlight. Ideal for those who often need a functional screwdriver.

Features of design and operation:
- Design. The screwdriver consists of a plastic housing with a commutator motor with a metal gearbox that sets the maximum torque on the spindle using an adjustable mechanical clutch. The lower part of the body goes into the handle, in which the switch is installed.
- Inclusion. The device can be easily turned on by pressing the switch button, and the spindle rotation frequency from the minimum to the maximum value can be smoothly changed by pressing the button.
- Reverse. The switch button is used to change the direction of spindle rotation (reverse). The middle position of the reverse switch blocks the screwdriver switch.
- Speed ​​shifter. The spindle speed range is switched using the speed switch key.
- Adjusting the tightening torque. The tightening torque can be adjusted by turning the adjusting ring so that its graduations are aligned with the pointer on the tool body. The tightening torque is minimum when the number 1 is aligned with the pointer, and maximum when the mark is aligned with the drill symbol. The clutch will slip at different torque levels.
- Drilling. This device is equipped with a drilling function. To minimize the risk of drilling through the material, reduce pressure on the drill and drill the hole carefully. Do not turn off the engine when removing the drill from a drilled hole, this will prevent the drill from breaking and jamming. Use lubricant when drilling into metal (except aluminum and copper).
- Backlight . Perfectly illuminates work area, especially in hard-to-reach and dark places.

Drainage Pump DN-550N Whirlwind is designed for pumping Wastewater, capable of handling dirty liquid and impurities. To protect the device from large elements, a special filter is built into the pipes.

The device is used for:

• watering and irrigation of suburban areas;
• pumping water out of the pool;
• filling containers with water;
• fire extinguishing;
• drainage of flooded areas and reservoirs.

The DN-550N pump is a durable metal casing, inside of which the motor is securely mounted in a sealed compartment and auxiliary elements. The outlet pipe has several sizes for connecting hoses. There is a handle on top of the body that makes it easy to transport the pump and immerse it in liquid.

Equipped with float technology

In design pump Whirlwind DN-550N There is a built-in float mechanism that controls the liquid level around the device body. The minimum acceptable level is set by the operator before starting the pump.

When the water level drops below the set level, the drainage pump DN-550N automatically turns off to protect internal parts from overheating and destruction. When the water rises again to a safe level, the pump will resume operation automatically.

Pump service life is at least 5 years

Once purchased, the Vortex pump does not require any preparation before use. The device is immersed in water, connected to the power supply and started. The operator does not need to control the unit during operation.

The pump has compact dimensions, which makes it easy to carry and store. During the cold season, the pump is placed in a warm, dry room as far as possible from sunlight. Compliance with operating conditions will extend the life of the device and reduce the risk of failure of its parts.

Characteristics

Main characteristics

Weight, kg 5.9

Dimensions (L/W/H), cm 22/18/39

Power, W 550

Maximum flow, m3/hour 10

Diameter of passed particles, mm 35

Delivery in Moscow and the region

You can purchase a product you are interested in worth more than 10,000 rubles with free delivery from a warehouse in Moscow. Delivery is carried out to the entrance.
If the order value is less than 10,000 rubles, the cost of delivery in Moscow will be 350 rubles.
Delivery outside the Moscow Ring Road is calculated in accordance with the tariff of 30 rubles per 1 km. (in case of transportation on a trailer - 35 rubles per 1 km.).
The forwarder will also provide you with all the necessary financial and warranty documents for the goods.

Delivery throughout Russia and CIS countries
If you do not live in Moscow, we can send you your order through a transport company by road, rail or air.
The delivery cost will be calculated automatically for the city you select. This cost includes forwarding of the order in Moscow and transportation to the warehouse of the transport company in the city of your choice.

You will have to receive the goods from this warehouse upon arrival of the order yourself.
Pickup
Office warehouse - Moscow region. Mytishchi, st. Voronina str. 16, office 101